Home

Linux reboot shortcut

Dein Online-Event mit vielen verschiedenen Inhalten rund um Linux und OpenSource. Livestream am 13. und 14. November 2021. Teilnahme kostenlo The reboot command, on its own, is basically a shortcut to shutdown -r now. From a terminal, this is the easiest and quickest reboot command: $ sudo reboot. If your system is being blocked from shutting down (perhaps due to a runaway process), you can use the --force flag to make the system shut down anyway This is a way to reboot linux systems gracefully, that often works to keep the file system healthy (in contrast to hard poweroff). SysRq is often on the PrintScreen key: Press Alt + PrintScreen continuously, sometimes the Fn key is involved too (in laptops), and then slowly (one key after another) the keys R E I S U B to reboot The -r (reboot) option will take your computer down to the halt state and then restart it. The -h (halt and poweroff) option is the same as -P. If you use -h and -H together, the -H option takes priority. The -c (cancel) option will cancel any scheduled shutdown, halt or reboot Linux-Reboot und -Restart mit Terminal-Befehl Grundsätzlich lässt sich Linux mit dem Befehl sudo reboot neu starten. Allerdings nutzen viele den Shutdown-Befehl im Kombination mit der Option -r.

ALT+SysRq+COMMAND-KEY. The 'SysRq' key is also known as the 'Print Screen' key. COMMAND-KEY can be any one of the following (all keys need to hit simultaneously) : 'b' : Will immediately reboot the system without syncing or unmounting your disks. 'o' : Will shutdown your system off (if configured and supported) Linux Reboot: Mit diesen einfachen Kommandos kann man einen Linux PC über die Konsole ausschalten oder neustarten. Für die meisten Befehle muss man aber als root oder Superuser. You can open the Terminal application either through the system's Application Launcher search bar or the Ctrl+Alt+T shortcut. The reboot command. The reboot command is the simplest way to restart your system; in a way that it does not power off and then on during this process. The command usually is used with no further flags/options. Simply using this command as follows will reboot your Ubuntu then n there: $ reboot

But hitting a couple of keys together, along with r.e.i.s.u.b. (or o in place of the b) in the right sequence, will safely restart/ or shut down your PC, whichever you choose. If one is just looking for a simple way to shut down or restart with the keyboard for fun, I wouldnt suggest it Typed a wrong command? Instead of using the backspace to discard the current command, use Ctrl+U shortcut in the Linux terminal. This shortcut erases everything from the current cursor position to the beginning of the line. 9. Ctrl + K. This one is similar to the Ctrl+U shortcut. The only difference is that instead of the beginning of the line, it erases everything from the current cursor position to the end of the line Go to the beginning of the selected line. Ctrl + E: Go to the end of the selected line. Ctrl + K: Cut the part of the selected line after the cursor and copy it to the clipboard. Arrow Up : Previously used command. Alt + B: Move the cursor back one word. Alt + F: Move the cursor forward one word. Ctrl + L: Clean the current screen. Ctrl + Ctrl + Alt + Del Just get out a dialogue, what I want is a command for normal user that can shutdown/reboot directly. When the command available, we can set up the keyboard shortcut. Thanks -reboot : This option reboot the machine, regardless of which one of the three commands is invoked. -f, -force : This option force immediate halt, power-off, or reboot. When it is specified once, this results in the immediate but clean shutdown by the system manager

REBOOT(2) Linux Programmer's Manual REBOOT(2) NAME top reboot - reboot or enable/disable Ctrl-Alt-Del SYNOPSIS top /* Since kernel version 2.1.30 there are symbolic names LINUX_REBOOT_* for the constants and a fourth argument to the call: */ #include <linux/reboot.h> /* Definition of LINUX_REBOOT_* constants */ #include <sys/syscall.h> /* Definition of SYS_* constants */ #include <unistd.h. When you are facing system hang or crash or freeze, you can use Linux special shortcut keys to restart or shutdown safely. It is actually something called Linux Magic SysRq Keys[1]. Do not use these shortcut keys unless you need it urgently. And you can use these shortcut keys on another Linux distro. Restar You want to open a new terminal in Ubuntu? Ctrl+Alt+T is the shortcut to open terminal in Ubuntu. This is my favorite keyboard shortcut in Ubuntu. I even mention it in various tutorials on It's FOSS when it involves opening a terminal. 3. Super+L or Ctrl+Alt+L: Locks the scree

Bootable USB image available | Secretchronicles Blog18 Free Security Tools for SysAdmins

Online-Event rund um Linux - Linux-Vorträge, -Workshops,

  1. Ubuntu 21.10 » Ubuntu Desktop Leitfaden » Tipps und Tricks » Nützliche Tastenkombinationen. Hier finden Sie einen Überblick über Tastenkombinationen, die Ihnen helfen können, Ihre Arbeitsumgebung und Anwendungen effizienter nutzen zu können. Falls Sie überhaupt keine Maus oder andere Zeigegeräte verwenden können, finden Sie im Abschnitt.
  2. ate (send SIGTERM to all processes, allowing them to ter
  3. al window), you can get to the beginning of a line with Ctrl + a and the end of a line with Ctrl + e. These do not work in GUI.
  4. Yes, you can boot the machine or Linux server using ssh. The SSH is protocol. It associated with Secure Shell. In short, ssh is a client-server technology that allows secure remote from one computer to another. The ssh client is a defacto standard in Linux and Unix world for managing servers. This page shows how t
  5. al) Root or sudo privileges (optional) SSH software package for communicating with a remote server; Steps to Restart Linux using Command Prompt Restarting Local Linux Operating System.
  6. Tip: You can make a shortcut for restart as well, follow the same tutorial except in step 3, use code shutdown -r now . You have a fully functioning keyboard shortcut to shutdown Linux just like Windows. Press Ctrl+Alt+K and your system is off
  7. utes, +n , where n stands for

3 commands to reboot Linux (plus 4 more ways to do it

General (22 shortcuts) 0. Ctrl + Alt + Backspace. Kill current X session. Use if normal exit procedure doesn't work. 0. Ctrl + Alt + Del. Shut down Red Hat Enterprise Linux system. -1 In addition to forcing reboots and the like, it can be used to dump the contents of the CPU registers, which could theoretically reveal sensitive information. Since using it requires physical access to the system (unless you go out of your way), most desktop users will probably consider the level of risk acceptable. That said, make sure you fully understand the implications of enabling it and. Th... If you're dual booting a Windows and Ubuntu desktop, it can feel a bit cumbersome having to wait for GRUB and then manually choosing to boot into Windows. Th... rastating.github.io. Creating a Reboot into Windows Button in Ubuntu. May 10, 2018 Canceling Linux Restart. If you want your system to discard previously scheduled restart or shutdown you can call another shutdown command with -c option and broadcast with it a message for users about the cancelation of restart. Here is the syntax and example $ sudo shutdown -c [MESSAGE] The previously scheduled reboot can be canceled by system administrator by issuing another shutdown.

Red Hat Linux Hotkeys - Keyboard Shortcuts [Ctrl] + [Alt] + [Backspace] = kills your current X session. Kills your graphical desktop session and returns you to the screen. Use this if the normal exit procedure does not work. [Ctrl] + [Alt] + [Delete] = shutdown and reboots your Red Hat Linux system. Shuts down your current session and reboots the OS. Use only when the normal shutdown. Method 1: Restart Lxssmanager service. Type services.msc and hit the enter button. From the Services window search for a Windows Subsystem for Linux service called LxssManager. Right-click on Lxssmanager service and select the option Restart. This will reboot/restart the windows subsystem for Linux -WSL (Ubuntu, Debian, Kali, OpenSUSE, etc) Re: Shut Down-Restart-Suspend Short Cuts. Post. by all41 » Mon Jul 03, 2017 4:11 am. The syntax is: systemctl poweroff. systemctl reboot. systemctl suspend. You can run these by creating an executable script (launcher) you can also create a keyboard shortcut such as Ctrl+Alt+S for suspend, and so forth Reboot is essentially turning off the computer completely and then, starting the system from scratch. In certain situations, rebooting is a must. For example, on the Linux system, the kernel update or other critical updates/patches. In short, rebooting is a very important thing to do in today's modern computing age 2007 - Started using Arch Linux as my only/main OS - Samsung Series 3, Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz - 8Gb DDR3 ram - 700Gb HDD On board intel Graphics & Sound. Offline #2 2009-01-22 20:16:58. joephantom Member From: Latinoamérica Registered: 2008-01-09 Posts: 94 Website. Re: [SOLVED]shutdown/reboot command for openbox menu. you can use sudo (with NOPASSWD), and make a openbox menu.

shortcuts - Restart Ubuntu via keyboard - Ask Ubunt

  1. als.. To maximize your productivity in Kali and save yourself some time, you can learn some keyboard shortcuts
  2. Drücken Sie das Tastenkürzel etwas länger, können Sie sich eine Auflistung der Shortcuts unter Ubuntu anschauen. <Super> + 1-9 Mit der Tastenkombination öffnen Sie das entsprechende Programm. Die Zahl steht für die Reihenfolge des Programms im Launcher. <Alt> + <F1> Durch den Shortcut fokussieren Sie auf den Launcher und können anschließend mit den Pfeiltasten im Launcher navigieren.
  3. How to create a shortcut to reboot to windows from ubuntu. Close. 7. Posted by 4 years ago. Archived. How to create a shortcut to reboot to windows from ubuntu. hi i just got ubuntu on a secondary hard drive and i'm still figuring it out. i'm trying to create an application or command that lets me to reboot to windows from ubuntu. i made a shell using this guide and got to the point where it.
  4. Sometime you can encounter such errors that your Gnome Desktop becomes unresponsive. Usually people reboot the system to make it work again. Let me share some tips to get your Gnome refreshed without rebooting the system. Method 1. Save all your open files and press Ctrl-Alt-Backspace. It will restart the Gnome instantly in almost no time. Method 2. If the above shortcut keys does not.
  5. al applications may require you to set up.
  6. How to Enter or Boot into BIOS. Computer and motherboard manufacturers and BIOS suppliers may use varying keyboard keys or key combinations that can be pressed during system post to access your system BIOS. Unfortunately there is no standard method to universally access or enter a motherboard BIOS. The following is a list of some popular BIOS suppliers, Computer Vendors and the keyboard key.

How to Reboot or Shut Down Linux Using the Command Lin

At the end of that line (may appear to span multiple lines, depending on resolution), you simply specify the runlevel to boot into, which is 3 (multi-user mode, text-only). Pressing Ctrl-X or F10 will boot the system using those parameters. Boot-up will continue as normal. The only thing that has changed is the runlevel to boot into In this article, we will explain to you the difference between shutdown, poweroff, halt and reboot Linux commands. We will make clear what they actually do when you execute them with available options. If you are hoping to dive into Linux server administration, then these are some of the important Linux commands you need to fully understand for effective and reliable server administration. Ubuntu 21.10 » Ubuntu Desktop Guide » Tips & tricks » This page provides an overview of keyboard shortcuts that can help you use your desktop and applications more efficiently. If you cannot use a mouse or pointing device at all, see Keyboard navigation for more information on navigating user interfaces with only the keyboard

Linux-Reboot mit Terminal-Befehl - so geht'

  1. al. If you are using the desktop edition, you can access the ter
  2. shutdown --reboot. Using systemctl command. An alternative to the shutdown command is to use the systemd systemctl command. Debian 10 power off using systemctl: systemctl poweroff. Debian 10 reboot using systemctl: systemctl reboot. How to Shutdown or Reboot Debian 10. Karim Buzdar April 26, 2021 April 26, 2021 Debian, Linux, Shell ← How to Change Cursor Size on Ubuntu Desktop; How to.
  3. As well as all mounter file systems (like encrypted ones), all connections to remote hosts etc. — The Super key opens the Activities overview. Move between menus using the Tab key; use Return/Enter to click on an item to open (or expand it); and use the left and right arrow keys to move sliders (e.g., Volume) up or down. The final Ubuntu keyboard shortcut that's worth remembering is.
  4. g up the system. In this state, the kernel warm-ups, the CPU start functioning, and the desktop environment loads the applications. In the Linux boot process, the runlevel state is represented with an alphabetic and a numeric token. If you at the picture given below, you can see that my Linux computer's current.
  5. How to Shutdown or Reboot Debian 10 (Buster) Debian 10 has now fully switched to Systemd which means that the traditional commands to halt or reboot a system like ' shutdown -h now ' or ' reboot ' will not work anymore. First of all, run the command as root user. Prepend the sudo command to become root user if needed

Howto Reboot or halt Linux system in emergency - nixCraf

  1. Most of the keyboard shortcuts for Windows 7 and Windows 8 will continue to work for Windows 10 as well. Here is a list of important keyboard shortcuts to shutdown or restart your Windows quickly. You can use the shortcut ALT + F4 to launch the Shutdown dialog box. But in order to use this shortcut, you need to be on the desktop first
  2. The following are the 6 high level stages of a typical Linux boot process. 1. BIOS. BIOS stands for Basic Input/Output System; Performs some system integrity checks; Searches, loads, and executes the boot loader program. It looks for boot loader in floppy, cd-rom, or hard drive. You can press a key (typically F12 of F2, but it depends on your.
  3. The magic SysRq key is a key combination understood by the Linux kernel, which allows the user to perform various low-level commands regardless of the system's state.It is often used to recover from freezes, or to reboot a computer without corrupting the filesystem. Its effect is similar to the computer's hardware reset button (or power switch) but with many more options and much more control
  4. Shortcuts - posted in LiveXP: I uploaded several scripts which bring a new mechanism into building shortcuts.The scripts which wants to have a shortcut, requests it at buildModel (same syntax as before)buildModel parses the syntax and writes the result into a ini filethen buildModel calls the activated shell script [add-shortcut] which builds the shell's specific shortcuts.I changed Explorer.

Linux Reboot: Linux PC Neustarten oder Ausschalte

This article explains how to boot a Linux distribution like Debian, Ubuntu, Fedora, Arch Linux / Manjaro, etc., in console mode, either temporarily or permanently. The instructions in this article should work with any Linux distribution that uses systemd (for the permanent mode below) and GNU GRUB (for the temporary mode), but I personally only tried this with Debian, Ubuntu, Manjaro and Fedora Below are the ways to shut down, turn off, reboot, etc. a Linux computer from the GUI or the command line. Shutting down or rebooting the computer from a GUI interface. Shutting down or rebooting the computer from a GUI interface depends on which GUI you are using. Often the shutdown, log out, and reboot options are available through the GUI's main menu or bar on one of the sides of the window. To perform a normal Restart, open Run (Start >> Run) and type in Shutdown -r . Your PC will reboot just as it would when you click Restart from the Start menu. To perform a Force Restart, type in Shutdown -r -f. To perform a Timed Force Restart, type in Shutdown -r -f -t 00. Read Command Line Parameters to try more commands We can reboot a Windows computer from command line using the in-built shutdown command. Below you can find syntax of this command for various use cases. The below commands work on Windows 7, Windows 8, Windows 10 and all other server editions. Command to reboot windows computer shutdown /r. The above command will set a time out of 30 seconds to close the applications. After 30 seconds, windows.

herunterfahren können, ohne dass sie nach einem Passwort gefragt werden. Eine andere einfache Lösung besteht darin, jedem Benutzer das Recht zum Ausführen des shutdown-Befehls einzuräumen, in man das entsprechende SUID-Bit, wie in chmod (Abschnitt SUID-bit) beschrieben, setzt: sudo chmod +s /sbin/shutdown To make a new shortcut, right-click on an empty part of the desktop (or inside a folder). Select New, then Shortcut. A wizard will pop up to guide you through the rest of the process. You will have to provide a command line, and then a name. The name can be anything you want. Shutdown & Restart Shortcuts for Windows XP & Windows 200

Linux Shortcuts and Commands: Linux Newbie Administrator Guide by Stan and Peter Klimas This is a practical selection of the commands we use most often. Press <Tab> to see the listing of all available command (on your PATH). On my small home system, it says there are 2595 executables on my PATH. Many of these commands can be accessed from your favourite GUI front-end (probably KDE or Gnome. From power up/reset to prompt, we can mainly divide the Linux booting process in to five areas. The BIOS, Stage I boot loader, Stage II boot loader, Kernel and Init. These are the important areas behind a booting process. Let us start the Linux booting process with BIOS. Step 1 Executing Linux Scripts During Reboot or Startup. There are two traditional methods to execute a command or run scripts during startup: Method #1 - Use a cron Job. Besides the usual format (minute / hour / day of month / month / day of week) that is widely used to indicate a schedule, cron scheduler also allows the use of @reboot. This directive, followed by the absolute path to the script. reboot - Stop all processes and then reboot - same as above startx - Start the X system. Recommended reading: Cheat-Sheets.org - All cheat sheets, round-ups, quick reference cards, quick reference guides and quick reference sheets in one page. The only one you need. Tutorial: The best tips & tricks for bash, explained - Linux Tutorial Blog / Quality Linux tutorials without clutter.

As usual, it will prompt you for the model of keyboard (what the keyboard *is*), and then for the keyboard layout (what the keys should *do*).Use this tool to change your keyboard map, e. g. from QWERTY to QWERTZ or to Dvorak, or for non-English layouts.. To apply new settings, restarting the keyboard-setup service should suffice, otherwise you can try to restart kernel input system via udev Ubuntu: Keyboard shortcut (accels) forgotten after reboot?Helpful? Please support me on Patreon: https://www.patreon.com/roelvandepaarWith thanks & praise t.. Description. halt, poweroff, and reboot are commands you can run as root to stop the system hardware.. halt instructs the hardware to stop all CPU functions.; poweroff sends an ACPI signal which instructs the system to power down.; reboot instructs the system to reboot.; These commands require superuser privileges.If you are not logged in as root, you need to prefix the command with sudo or.

Ulauncher - A Lightweight Application Launcher for Linux

Method 3Method 3 of 4:Using a Launcher Shortcut Download Article. Click the Dash button. You can find this in the Launcher bar, and it has the Ubuntu logo. Type terminal to search for it. Drag the Terminal icon from the search results to your Launcher bar. Click the new Terminal icon to launch it any time For computer users, Windows is the most commonly used operating system, but Linux is always a dual-boot trying due to its various advantages: open source, more secure, stable, flexible, revive old computer, totally free, and more. Thus, a lot of Windows users would like to have a try on Linux, and they wonder how to install Linux on Windows 10. In fact, Linux is divided into many distributions. This trivial innovation caters to the lazybones in the Linux user, or perhaps that perfectionism that seeks maximum efficiency and ease of use in every element of a desktop. My personal ideal would be for the computer to become as easy to use as an appliance, albeit an intelligent appliance. Every appliance has an On/Off button, and there's no reason Linux Mint can't either, because Linux Mint.

Create Restart Shortcut in Windows 10 To create a shortcut to restart Windows 10, use the shutdown /r /t 0 command as follows: Right click the Desktop and select New - Shortcut. In the shortcut target box, type or copy-paste the following command: shutdown /r /t 0. See the following screenshot: Set the desired icon and name for your shortcut To use the default boot image on the server, press and hold Option-N instead. Disabled when using a firmware password. Command-S: start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password. T: start up in target disk mode. Disabled when using a firmware password. Command-V: start up in verbose mode

How to disable GUI on boot in Ubuntu 20.04 step by step instructions. The following command will disable GUI on boot hence upon the reboot the system will boot into multi user target: $ sudo systemctl set-default multi-user Reboot or log out from a current session to exit GUI: $ gnome-session-quit How to enable GUI to start on boot. Given that you have installed GUI on your Ubuntu 20.04 Server. To use the default boot image on the server, press and hold Option-N instead. Disabled when using a firmware password. Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password. T: Start up in target disk mode. Disabled when using a firmware password. Command-V: Start up in verbose mode Restart your computer. Restart-Computer. After restarting, download and install the WSL 2 Linux kernel from Microsoft for your device architecture: x86_64 for Intel and AMD devices arm64 for Snapdragon and other ARM devices Finally, it is recommended to set WSL 2 as the default WSL environment Linux is fully capable of running not weeks, but years, without a reboot. In some industries, that's exactly what Linux does, thanks to advances like kpatch and kgraph. For laptop and desktop users, though, that metric is a little extreme. While it may not be a day-to-day reality, it's at least a weekly reality that sometimes you have a good reason to reboot your machine. And for a system.

Sometimes you just have to go for the reboot or the total shutdown. If you're working on a GUI-less server or you're on an SSH session to a remote computer, the command line is your only option. Linux and Unix-like systems such as macOS provide several commands to shutdown or reboot your system right from the command line Wie die gängigen Linux-Versionen ausgeschaltet oder neugestartet werden können: Wer sich einmal auf die Linux Konsole eines Server, PC, Tablet, Fernseher, Mediaplayer, Radio, Router oder eines anderen Gerätes auf Linux Basis verirrt, kann das System meist mit dem reboot Befehl neustarten. Mit dem shutdown-Befehl kann das System heruntergefahren oder neugestartet werden This is a way to reboot linux systems gracefully, that often works to keep the file system healthy (in contrast to hard poweroff). SysRq is often on the PrintScreen key: Press Alt + PrintScreen continuously, sometimes the Fn key is involved too (in laptops), and then slowly (one key after another) the keys R E I S U B to reboot. When you press the 'letter keys' you need not specify caps lock. Die Option r, die für reboot steht, kann in diesem Fall natürlich nicht weggelassen werden - sonst würde Linux ohne Neustart herunterfahren. Linux-Shutdown - weitere Befehle Neben den oben genannten Befehlen für den Linux-Shutdown gibt es noch eine Reihe weiterer Befehle und Optionen rund um das Anhalten, Ausschalten oder Neustarten eines Linux-Betriebssystems Note: We will be using the Ubuntu command line, the Terminal, in order to explain the use of commands mentioned in this article. You can open the Terminal application either through the system's Application Launcher search bar or the Ctrl+Alt+T shortcut. The reboot command. The reboot command is the simplest way to restart your system; in a.

Linux veterans understand that the keyboard is mightier than the mouse because there are many actions that take multiple mouse clicks but can be accomplished with a single keyboard shortcut. Learning at least a handful of keyboard shortcuts can make you significantly more productive as a Linux user and earn you serious bragging rights in the Linux community There are certain Linux terminal shortcuts that every user must know and practice. Trust me; once you master these shortcuts, you'll notice how good you are with using the Linux command line. Must Know Linux Shortcuts. I would like to mention that some of these shortcuts may depend upon the Shell you are using. Bash is the most popular shell, so the list is focused on Bash. If you want, you. Reboot Linux system command. You must as root user to reboot the system. Open the terminal application (or to remote box using ssh client) and type any one of the following command to reboot the system immediately: # /sbin/reboot OR # /sbin/shutdown -r now You can also use sudo command under Ubuntu/Debian/Fedora and other Linux based distros: $ sudo reboot It is a good idea to. For Ubuntu 15.04 and later. This is due to Ubuntu's shift in using systemd instead of Upstart. systemctl poweroff systemctl reboot systemctl suspend systemctl hibernate systemctl hybrid-sleep Since hibernate is normally disabled by default in Ubuntu systems, you can enable this by checking this answer. For Ubuntu 14.10 or earlier. Shutdown

This will be our shortcut for shutdown. Tip: You can make a shortcut for restart as well, follow the same tutorial except in step 3, use code shutdown -r now. You have a fully functioning keyboard shortcut to shutdown Linux just like Windows. Press Ctrl+Alt+K and your system is off. Please let me know if it worked for you in the comments reboot command is used restart or reboot the system. In a Linux system administration, there comes a need to restart the server after the completion of some network and other major updates. It can be of software or hardware that are being carried on the server. The reboot is needed so that the changes that the user have done can be affected on the server. For example, if the user is re.

3 Ways to Reboot Ubuntu through the Command Line - VITU

A few simple keyboard shortcuts can make your work in Linux far more efficient. Jack Wallen runs through 10 of his favorites, for both desktop environments and window managers If you are one of the power users who use workspaces, you can use the Ctrl+Alt+Up arrow and Ctrl+Alt+Down arrow keys to switch between the workspaces. 13. Ctrl+Alt+Del: Log out. No! Like Windows, the famous combination of Ctrl+Alt+Del won't bring task manager in Ubuntu (unless you use custom keyboard shortcuts for it) Linux lässt sich sehr schnell mit den richtigen Befehlen sofort oder zeitgesteuert herunterfahren. Wir zeigen, wie das mit Linux-Befehlen oder mit einer grafischen Benutzeroberfläche geht

Restart your system; Power Off the system; If you do not press any of the buttons, the system will automatically shut down after 60 seconds. The dialog even shows a countdown, by the delay of 10 seconds, after which your system will be powered off. Through the power of custom shortcuts on Ubuntu, you were able to get the good old Ctrl+Alt+Del shortcut back for powering off your system. You can.

Stream || Knowledge Moving Continuously: Unix/Linux CommandsHelp Manual - InstallIDioT COmputER: EASY SHUTDOWN BUTTONHow to Install GalliumOS on Dell Chromebook 3120 Candy